• MTK952.jpg
  • MTK952-retro.jpg

Wisycom MTK952 Wideband In Ear Monitoring Dual Channel Transmitter [Rack Mount]

S$ 6,960.00
- +
icon-bag Add to Cart

MTK952 is a versatile dual transmitter capable of working in a huge UHF bandwidth and of generating any kind of narrow-band modulations, with very high quality and low spurious emissions.

DC: DC power supply (10-16VDC)
MS: Master Slave configuration for iso-frequency network


  • 330 MHz Bandwidth
  • Direct Digital Synthesis (DDS) of signal for the highest flexibility and quality (> 70 dB stereo separation)
  • Stereo, mono, intercom audio modulation
  • DSP audio processing (40bit floating point / 2Gflops) with multi-companding
  • Low interference output stage with wideband intermodulation phase cancellation
  • 2400 user-defined frequencies (40 group by 60 freq.)
  • Analogue & digital input (AES3)
  • Output power up to 2 Watt (-2W0 option)
  • Redundant power supply 230/110 Vac & 12 VDC (DC is optional)
  • SWR (Stationary Wave Ratio) sensing on antenna outputs
  • Reference In/Out for iso-frequency transmission (with option MS)
Frequency ranges470 ÷ 800 MHz
Switchable channels2400 managed in 40 groups ofr 60 frequencies completely user customizable
Switching-window330 MHz tuneable
Frequencies5 kHz steps
RF Powerswitchable typ. 10,20,50,100,200 mW (ERP) for MTK952-0W2
Max RF output powerMTK952N-0W2: 200mW
MTK952N-2W0: 2Watt
[NOTE] RF power can be limited on frequency base accordingly to specific country restrictions (software based)
Antenna connectorBNC type female (for MTK952), N type female (for MTK952N)
M-S I/O2xBNC type female connectors (only for MTK952N with MS option)
RF impedance50 Ω
ModulationFM, MPX Stereo or mono, selectable with dedicated menu
Peak deviation±56 kHz for mono, ±48 kHz for stereo (preset mode)
MPX Pilot tone19kHz
Tone squelch32.789Hz (for Wisycom wireless microphone, i.e. ENR/ENC)
131,8 (for Wisycom intercom, i.e. NR)
NOTE: custom setting can change the Tone squelch (30-260Hz and 18-38KHz)
Spurious emissions< 2 nW
Noise Reduction systemENR (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized
ENC (Wisycom Extended-NC), with independent Attack- and Recovery-time, voice optimized & with reduced pre-emphasys
NONE-d50, no compander, pre-emphasis 50 μs
NR, to work with Wisycom Intercom system
Other compander on request
AF bandwidth20÷20kHz (mono)
30÷15kHz (stereo)
NOTE: custom setting can change audio bandwidth (3/4/12/15/20kHz)
Audio input connectorXLR-3 / 1/4“ (6,3mm) jack combo socket, electronically balanced
Audio input level+18dBu
Pin AssignmentsXLR: 1=ground 2=hot 3 =cold
6.35mm (1/4”) TRS: Tip=hot Ring=cold Sleeve=ground
Digital outputAES3 on XLR-3M (32kHz ÷108 kHz)
Monitor output6.35mm (1/4”) jack socket, balanced
Monitor output level120+120mW@24Ω , 80+80mW@150Ω
Monitor out impedance25Ω for auricle
Managing interface10/100 Base TX Ethernet port on RJ45 connector
Display64 x 256 OLED (yellow)
Power supply90 - 264 V AC, 50/60 Hz
DC options10÷19 VDC (NOTE: increased to 10÷28 Vdc since May 2015), Max 7A
Temperature range-10 ÷ +55 °C
Dimensions19”/1U 43,8 x 483 x 407 mm (HxWxD) with brackets
Weight3.8Kg (version 200mW with DC and MS options); 4Kg (version 2Watt with DC and MS options)
Your cart is currently empty.
Continue shopping